ECS-TC Thru-Axles
The ECS-TC (Enhanced Center Stiffness – Torsion Control) System is all about reducing flex at pivots and links. 15mm thru-axles at the shock link and main pivot are clamped on both sides, tying the two sides together. This dramatically increases stiffness for instant responsiveness and control.
Double-Stacked Rear Dropout Pivot Bearings
As part of the ECS-TC System, we double-stack the bearings at the rear dropout pivots. By placing two bearings side-by-side in each pivot, we eliminate twisting play in the bearings, radically stiffening the swingarm.
DYAD RT2 – Adjust your Attitude
A two-position shock mount on the frame lets you choose between two base geometries. Then a handlebar switch lets you flip between the shock’s Elevate mode (110mm) and Flow mode (180mm). Each mode has its own air spring volume and damping circuits, and its own ride geometry. It is like having two different bikes available to you at the flick of a switch.
Frame
Claymore, 180/110mm, SmartFormed alloy, BB30, ISCG03, Diablo 1.5 Si head tube
Fork
Fox VAN R O/B, 180mm, 20QR thru axle, 1.5"
Crank
SRAM S1400, BB30, 36/22
Bottom Bracket
SRAM BB30
Shifters
SRAM X7
Cog Set
SRAM PG-1030, 11-36, 10-speed
Chain
KMC X10, 10-speed
Front Derailleur
SRAM X7, direct mount
Rear Derailleur
SRAM X9
Rims
SunRingle Inferno 27, 32 hole
Hubs
Formula, 32 hole, thru20 front, 142x12mm rear
Tires
Schwalbe Hans Dampf Performance, 2.35", folding
Pedals
not included
Brake
Avid Elixir 7, 200/180mm
Handlebar
Cannondale C3 riser, 740x18mm, 2014 alloy
Stem
Cannondale C3, 1.5", 31.8
Headset
Tange Seiki 1.5", Si Angular Contact
Spokes
DT Swiss Champion BLK 1.8mm
Grips
Cannondale alloy locking grips w/closed end
Saddle
Cannondale Stage CrMo
Seat Post
Cannondale C2, 31.6x350mm
Rear Shock
Fox DYAD RT2 dual shock 180/110mm
Extras
High Pressure Shock Pump, DYAD Remote Lever, Syntace X-12 142 mm rear axle
