Double-Stacked Rear Dropout Pivot Bearings
As part of the ECS-TC System, we double-stack the bearings at the rear dropout pivots. By placing two bearings side-by-side in each pivot, we eliminate twisting play in the bearings, radically stiffening the swingarm.
The ECS-TC (Enhanced Center Stiffness – Torsion Control) System is all about reducing flex at pivots and links. 15mm thru-axles at the shock link and main pivot are clamped on both sides, tying the two sides together. This dramatically increases stiffness for instant responsiveness and control.
Claymore, 180/110mm, SmartFormed alloy, BB30, ISCG03, Diablo 1.5 Si head tube
Fox VAN R O/B, 180mm, 20QR thru axle, 1.5"
SRAM S1400, BB30, 36/22
SRAM PG-1030, 11-36, 10-speed
KMC X10, 10-speed
SRAM X7, direct mount
SunRingle Inferno 27, 32 hole
Formula, 32 hole, thru20 front, 142x12mm rear
Schwalbe Hans Dampf Performance, 2.35", folding
Avid Elixir 7, 200/180mm
Cannondale C3 riser, 740x18mm, 2014 alloy
Cannondale C3, 1.5", 31.8
Tange Seiki 1.5", Si Angular Contact
DT Swiss Champion BLK 1.8mm
Cannondale alloy locking grips w/closed end
Cannondale Stage CrMo
Cannondale C2, 31.6x350mm
Fox DYAD RT2 dual shock 180/110mm
High Pressure Shock Pump, DYAD Remote Lever, Syntace X-12 142 mm rear axle